Products

All categories
Your location:
Homepage
/
/
/
2BE Series of the Operating Principle of Liquid Vacuum Pumps and Compressors
2BE系列液环真空压缩机组
2BE系列液环真空压缩机组

2BE Series of the Operating Principle of Liquid Vacuum Pumps and Compressors

Product description

The Operating Principle of Liquid Vacuum Pumps and Compressors:

Liquid ring vacuum pump is the pump design of capacity change. The impeller is installed in the pump body eccentrically,and the cycling of the impeller makes the working liquid form a revolving ring in the pump’s wall,here two adjacent vanes, impeller hub and the liquid ring inner face form a gas cavity which is sealed by the working liquid. As the cycling of impeller, the intake volume of gas cavity increase and internal pressure decrease,the gases will therefore be taken in; In the discharge area, the volume of gas cavity decrease gradually and internal pressure increase, the gases will therefore be compressed and discharged.

The unique design and wide application:

We have very rich experiences on the design, production, matching unit, application of the liquid ring vacuum pumps and compressors. Our product features good performance, high reliability, convenient operation and maintenance, which have won the wide praise of customers.

1. It takes the design of port plate: there is a major clearance between impeller and plate; the geometries adopt optimized design with high efficiency and energy-saving; lubricating system is not needed for its non-machinery frication. It can process the gases which contain tiny solid particle, fiber and some liquid.

2. Because of the existence of the liquid ring, the compression of gas is processing in the isothermal condition; the temperature drop between intake and discharge is under 11℃, therefore high temperature gas in the pump will be cooled; the condensable gas can be condensed and recycled, and the phenomenon of gas polymerization can be avoided.

3. The working liquid avoids the spark forming in the compressor, so it can compress the gases safely which are highly inflammable and explosive, such as acetylene, hydrogen, etc.

4. It takes the rigid rotor design and the welding fabrication technology to achieve never-broken; the operating speed is far below the first critical speed, so it is unnecessary to install the vibration inspection meter.

5. The capacity of discharge can be adjusted by frequency modulation or circumfluence.

6. The noise level should be under 85dba at one meter.

7. Being made of carbon steel, cast iron or stainless steel, the shaft seal takes stuffing and single end or double ends machinery seal according to different conditions.

8. Water, acidic water, oil of vitriol, glycol, water with oil, oil, etc can be used as disposable of cycled working liquid, such as the compressed conveying of chlorine.

9. On basis of single pump set, we can provide users with the unit designed to all kinds of working conditions. It includes pump, motor, separator, heat exchanger, gear box, shared base and all kinds of attachments such as meters, valves, and control system ranging from simple to complex, common to explosion proof.

10. When the liquid ring pump & compressor can’t satisfy the pumping pressure demands of fabrication, it’s necessary to use compound vacuum system or high pressure compressor; water ring pump, air ejector, steam ejector and roots pump usually adopt series connection, so that it can reach the absolute intake pressure of 100pa. and the high pressure compressor 0.8MPaG

11. Due to the features described above, liquid ring pumps & compressors have been applied in each corner of petroleum & chemical industry, such as vacuum crystallization, vacuum distillation, vacuum filtration, changed pressure adsorption, water deoxidization, polyester, discarded gas recycling, the recycling of VCM in the PVC equipment, the compressing of CO2 in sugar industry, conveying of all kinds of materials and so on.

We could not find any corresponding parameters, please add them to the properties table
Previous
Next

Products

 The Operating Principle of Liquid Vacuum Pumps and Compressors
The Operating Principle of Liquid Vacuum Pumps and Compressors
 2BEA-P1Series of Water Ring Vacuum Pumps and Compressors
2BEA-P1Series of Water Ring Vacuum Pumps and Compressors
 2BE Series of the Operating Principle of Liquid Vacuum Pumps and Compressors
2BE Series of the Operating Principle of Liquid Vacuum Pumps and Compressors
 SZ Series of Water Ring Vacuum Pumps and Compressors
SZ Series of Water Ring Vacuum Pumps and Compressors
 2BW4 Water Ring Vacuum Pump Unit
2BW4 Water Ring Vacuum Pump Unit
 SK Series of Water Ring Vacuum Pumps
SK Series of Water Ring Vacuum Pumps
 2BEY1, 2BEY2 Series of Water Ring Compressors
2BEY1, 2BEY2 Series of Water Ring Compressors
 2BVA Series of Water Ring Vacuum Pumps and Compressors
2BVA Series of Water Ring Vacuum Pumps and Compressors
 2SK-P1 Series of Two Stage Water Ring Vacuum Pumps-Air Ejector System
2SK-P1 Series of Two Stage Water Ring Vacuum Pumps-Air Ejector System

CONTACT US


Sales Hotline: 0533-4178155  0533-4175945
Fax: 0533-4179957
Website: www.hcjt.cc
E-mail:shzkb@shzkb.com

Address: 299# Guojing Road, Boshanxi, Zibo City, Shandong Province
Zip code: 255200

huacheng

Copyright © Shandong Huacheng Group Co., Ltd.   0533-4178155  0533-4175945   ​Address: 299# Guojing Road, Boshanxi, Zibo City, Shandong Province  鲁ICP备12033235号  Powered by www.300.cn